Bathroom wall panels – Paneling lets you add color and style to any bathroom, and choices in design or color provide many options to increase your space. The panels can be attached to many different surfaces, depending on the type you buy. If you want to improve the appearance of your space without reform, panel’s installation can be done in a short period of time with only a few tools. The panels are available in the centers of home improvement, allowing you to transform the look of the bathroom in a weekend.
Turn off the water and remove any accessories that are coming through the walls, like a tap or dish soap, using pliers. Clean the walls with water and a cloth to remove any dust accumulation or soap and let dry completely. Install drywall bathroom wall panels to avoid the appearance of mold growth after installation. Lift the panel up against the wall to mark the height. With a pencil, draw a line on the top of the panel on the wall. Draw the line throughout the area you want panel. If the panels have to be attached directly to the studs, remove the drywall directly below the pencil with a pry bar to expose the studs. Measure the location of the faucet to transfer to the panels.
12 Photos Gallery of: Placing Bathroom Wall Panels Ideas
Placing bathroom wall panels, holes in the paneling to accommodate accessories. Check the installation instructions to determine what type of adhesive is required for bonding. Spread a thin layer of adhesive directly on the walls and press the panel on your site or spread the adhesive directly to the posts if the required panel and press firmly in place. Re-drilled on the upper lip of the panel and ensure the panel of the posts with galvanized roofing nails, holes if you are using a panel needs direct application to the uprights. Allow the glue to dry for at least 24 hours before replacing fixtures and running water in the bathroom.