Seagrass bar stool – Customize banks Seagrass to complement any decorating style simply painting them. By using bar stools with unfinished painting, you spare the time to remove the old finish; however, if you are using banks already painted, you must first remove the old finish with sandpaper. An orbital sander saves time or you can do with your hands. The methods of painting range; painting with brush is an option, but many designers prefer spray paint because of small parts in banks.
Instructions for paint seagrass bar stool with method spray; 1) Put a cloth to protect the surface you are working. Using an orbital sander or a piece of sandpaper, sand each bank thoroughly to remove any glossy varnish or paint finish. Start with the smallest sandpaper and finish with the most. 2) Remove all dust on banks with a chamois or damp cloth. 3) Turn the stool upside down. Put on your goggles and mask painting. Spray two or three thin coats of primer. Allow each coat to dry and lightly sand banks before applying the next coat. Repeat on the seat or on the top right when you turn it. 4) Spray a thin layer of spray paint, holding the can 15 cm seagrass bar stool. Use the spray carefully to better control and better accuracy.