Aluminum fence panels – In most cases, the aluminum fences secured by placing fence posts inside the concrete-filled holes in the ground. If you have a concrete retaining wall along your property line, but this may not be possible. Instead, you need to install the fence on top of the wall.
Check the labels on top of the retaining wall to mark the location of the aluminum fence panels post. Drill a hole 3 inches long and 4 inches deep in the retaining wall on each field with a core drill. Put a fence post in the first hole. Check it for plumb (vertical) having a plan and slide shims into the gap between the post and concrete, if necessary. Place hydraulic grout into the hole around the post until it is half full. Remove shims you placed in the hole and finished filling it with grout. The rest of the positions of the wall, using the same process and allowing the grout to set the time indicated on the package.
12 Photos Gallery of: DIY Aluminum Fence Panels
Install aluminum fence panels to the posts. The panels are manufactured to replicate wrought iron fence, with the advantage of being easier and cheaper than wrought iron. The fence panels are available in a variety of designs and can be found at a home improvement store or on companies selling fences and related products.